Ring Doorbell Blinking Blue Light Causes & Solutions

Ring Doorbell Blinking Blue Light Causes & Solutions: What You Need to Know

If you’ve recently noticed your Ring doorbell blinking blue and are wondering what it means, you’re not alone. Whether it’s a Ring camera blinking blue or a doorbell, many users face this issue. It can be frustrating if you’re not sure what’s causing the flashing blue light or how to fix it. But don’t worry—I’ve got you covered!

In this post, I’ll explain the common causes behind the Ring doorbell blinking blue light, how to troubleshoot and resolve the issue, and provide you with my top product recommendations from Amazon that can improve your Ring experience.

Let’s dive into the details!

---

What Does a Blinking Blue Light on My Ring Doorbell Mean?

The Ring doorbell blinking blue light is a signal that your device is performing a certain task. It’s important to understand that this is often not a cause for concern, but there are a few things that can cause it to flash continuously.

Here are some common causes:

1. Connecting to Wi-Fi:
   • A Ring camera blinking blue or doorbell blinking blue often happens when the device is trying to connect to your Wi-Fi network. If the light is flashing but not solid, it could mean that your device is still in the process of trying to connect to Wi-Fi. Once it’s connected, the flashing blue will stop.
2. Firmware Update:
   • Sometimes, a Ring camera blinking blue indicates that the device is installing a software update. Ring frequently rolls out updates to improve functionality and security. If the light is flashing, just wait for it to finish.
3. Motion Alerts or Notifications:
   • If your Ring doorbell blinking blue or Ring camera blinking blue only occurs intermittently, it may be related to an incoming notification or motion alert. For example, when a person or movement is detected near the doorbell, it flashes blue to notify you of an event.
4. Battery or Power Issues:
   • A flashing blue light can also indicate that your device has a low battery or isn’t getting enough power. This issue is particularly common in battery-powered Ring cameras and Ring doorbells. If your battery is running low, you’ll need to charge it or replace it if necessary.

---

Common Causes of Ring Doorbell Blinking Blue Light

To get to the root of the issue, it’s important to consider some of the most common causes of this flashing blue light. Here’s a closer look:

1. Wi-Fi Connection Issues

When your Ring camera blinking blue occurs, one of the primary reasons is poor Wi-Fi connectivity. Your Ring device needs a stable and strong Wi-Fi connection to work correctly. If your router is too far away from the doorbell or there’s interference, the device may struggle to connect, leading to a blinking blue light.

How to Fix It:

• Move your router closer to the Ring device or use a Wi-Fi extender.
• Ensure that your Wi-Fi password is correctly entered in the Ring app.
• Restart your router and reconnect the device to Wi-Fi.

2. Firmware or Software Updates

If your Ring device is updating its firmware, it will often display a Ring camera blinking blue or doorbell blinking blue. This is perfectly normal. These updates ensure that your device is equipped with the latest security features and bug fixes.

How to Fix It:

• If the blue light continues flashing for more than 10-15 minutes, you may need to manually check for updates via the Ring app.
• Check the Ring app to ensure the update is complete.

3. Battery Issues

If your Ring device is battery-powered, a flashing blue light might indicate that the battery is low. When the battery falls below a certain threshold, the blue light may start blinking to alert you that it’s time to recharge.

How to Fix It:

• Charge your Ring doorbell or camera using the included charging cable. This will stop the flashing blue light once the battery is fully charged.
• For models with removable batteries, you can replace the battery if it no longer holds a charge.

4. Setup Mode or Reset Mode

A Ring camera blinking blue could also indicate that the device is in setup or reset mode. If you’ve recently installed your Ring doorbell or camera, it’s likely still trying to connect to Wi-Fi or complete the setup process.

How to Fix It:

• Open the Ring app and complete the setup process by following the on-screen instructions.
• If the flashing continues, reset the device by holding down the reset button on the back for about 15 seconds, then try the setup again.

---

How to Troubleshoot Your Ring Doorbell Blinking Blue Light

If your Ring camera blinking blue persists or you’re not sure why the blue light won’t stop flashing, here’s a step-by-step guide to troubleshoot the problem:

1. Check Your Wi-Fi Signal:
   • Ensure that your Ring device is within the range of your router and that your Wi-Fi signal is strong enough to support it. If your signal is weak, consider using a Wi-Fi extender.
2. Check for Updates:
   • Sometimes the Ring camera blinking blue is just a sign that your device is updating its firmware. Check the Ring app to see if an update is in progress. If you haven’t updated in a while, do so manually.
3. Charge or Replace the Battery:
   • If your device is running on a battery, check its charge level. Low battery power can cause the Ring doorbell blinking blue light. Plug it in to charge, or replace the battery if needed.
4. Reset the Device:
   • If nothing seems to work, reset your Ring device by holding the reset button for 15 seconds. Once it resets, follow the setup instructions in the Ring app.

---

Top Ring Products on Amazon to Enhance Your Experience

If you’re looking to upgrade your Ring setup or ensure that your device is performing optimally, here are a couple of Ring products I highly recommend, available on Amazon:

---

All-new Ring Battery Doorbell

---

Ring Wired Doorbell Pro (Newest Model)

---

Conclusion

The Ring camera blinking blue or Ring doorbell blinking blue is generally not something to panic over. It usually signals a connection, update, or notification event. By following the troubleshooting tips outlined above, you should be able to resolve the issue quickly.

If you’re looking to improve your Ring experience, I highly recommend checking out the Ring Video Doorbell Pro + Chime or the All-New Ring Battery Video Doorbell—both available on Amazon. These devices provide excellent video quality, enhanced motion detection, and improved performance, all while making installation a breeze.

Let me know if you have any further questions, or feel free to share your troubleshooting tips in the comments below!